Location of controls (Wireless Unit)

The location of controls of the Wireless Unit is described below.

  1. NOT TRANSLATEDHDMI IN connector

    Connect an NOT TRANSLATEDHDMI device with a commercially available NOT TRANSLATEDHDMI cable. You can project images from the connected device.

  2. NOT TRANSLATEDHDMI OUT connector

    Connect a TV with a commercially available NOT TRANSLATEDHDMI cable. You can display images from the device connected to the Wireless Unit onto the TV screen.

  3. NOT TRANSLATEDIR BLASTER connector

    Connect the IR Blaster (supplied)

  4. NOT TRANSLATEDDC IN 5V jack

    Connect the AC adaptor NOT TRANSLATEDLSPX-AC5V2 (supplied).

  5. NOT TRANSLATEDPAIRING button

    The projector and the Wireless Unit have already been paired (connection setting) at the time of purchase. When the pairing is removed, such as after maintenance, use this NOT TRANSLATEDPAIRING button to pair them again.

  6. Indicator

    Indicates the status of the Wireless Unit.

Go to Page Top