Adjusting the picture settings
You can adjust the picture settings of the projector.
- Start
/ 
(CONSTANT [2359]Portable Ultra Short Throw Projector Application) on the smartphone. - Tap the
(CONSTANT [2072]Settings) button. - Tap [CONSTANT [2073]Picture].
- Select the item to be adjusted.
Setting items
[CONSTANT [2086]Preset 1]
This option is suited to projecting onto a white wall, table or floor.
[CONSTANT [2087]Preset 2], [CONSTANT [2088]Preset 3]
This option is suited to projecting onto a yellowish wall, table or floor. Select the desired color tone.
[CONSTANT [2089]Custom 1], [CONSTANT [2090]Custom 2]
By default, [CONSTANT [2089]Custom 1] is adjusted to a brightness-oriented setting, and [CONSTANT [2090]Custom 2] is adjusted to be suited to natural images.
You can tap the 
button to adjust to one of the following settings:
[CONSTANT [2094]Saturation], [CONSTANT [2095]Brightness], [CONSTANT [2096]Contrast], [CONSTANT [2098]Sharpness], and [CONSTANT [2099]White balance]
Tap [CONSTANT [2103]Reset] to reset to the default settings.
