#

# i-Manual online

- Print
- Font Size

- Top Page >
- Troubleshooting >
- General

# General

- Poor picture on “BRAVIA” Internet Video.
- Small picture on “BRAVIA” Internet Video.
- Certain Internet video programmes display a loss of detail, especially during fast-motion or dark scenes.
- Good picture quality but no sound on the Internet video content.
- You do not see many videos in the Internet Video Guide.
- Distorted picture and/or sound.
- TV turns off automatically.
- TV turns on automatically.

Poor picture on “BRAVIA” Internet Video.
  - The quality of the video displayed on your TV depends on the quality of the video provided by the video content provider as well as your connected bandwidth.
Small picture on “BRAVIA” Internet Video.
  - Press / to zoom in and out.
Certain Internet video programmes display a loss of detail, especially during fast-motion or dark scenes.
  - Video quality and picture size vary and are dependent upon broadband speed and delivery by content providers.
Good picture quality but no sound on the Internet video content.
  - Quality depends on content provided by the video content provider as well as your connected bandwidth.
  - Due to the nature of Internet video, not all videos will contain sound.
You do not see many videos in the Internet Video Guide.
  - Press the OPTIONS button and select categories to view more content.
Distorted picture and/or sound.
  - Keep the TV away from electrical noise sources such as cars, hair-dryers or optional equipment.
  - When installing optional equipment, leave some space between the equipment and TV.
  - Check the antenna (aerial)/cable connection.
  - Keep the antenna (aerial)/cable TV cable away from other connecting cables.
TV turns off automatically.
  - Check if “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer”.
  - Check if “Idle TV Standby” in “Eco” is activated.
TV turns on automatically.
  - Check if “On Timer” is activated.
Some input sources cannot be selected.
  - Select “AV Preset” and confirm the “Always” setting for the input sources.
The language you set in the initial set-up is not applied to the BD menu.
  - Select “OSD” from “System Settings” in the “Blu-ray Disc Player” menu, and then set your secondary preferred Language.
HDMI equipment does not appear on “HDMI Device Selection”.
  - Check that your equipment is compatible with “Control for HDMI” and the value of “Control for HDMI” is “On”.
You cannot select “Off” in “Control for HDMI”.
  - You cannot select “Off” for any audio system compatible with “Control for HDMI”. If you want to change the audio output to the TV speaker, select Speakers > TV Speakers.
Not all channels are tuned for cable.
  - Check the support website for cable provider information.
    http://support.sony-europe.com/TV/DVBC/

Copyright 2010 Sony Corporation