# Digital Still Camera DSC-QX10/QX100

## Charging the battery pack

Charges the battery pack when it is in the camera.

1. Turn off the power of the camera.
2. Insert the battery pack in the camera.

3. Connect the multi terminal of the camera to a USB port of your computer, using the micro USB cable (supplied).

   Charge lamp (A)

   Lit: Charging

   Off: Charging finished

   Flashing: Charging error, or charging paused temporarily due to charging outside appropriate temperature range

   If you do not have a computer, use the AC adaptor AC-UD10 or AC-UD11 (both sold separately).

   The AC Adaptor AC-UD11 (sold separately) may not be available in some countries/regions.

#### Charging time (Full charge)

The charging time is approximately 115 min. using the micro USB cable (supplied).

The above charging time applies when charging a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

#### Note

- Note the following points when charging:

  - If the camera is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not charge for an extended period of time.
  - Do not turn on/off or restart the computer, or wake the computer to resume from sleep mode when a USB connection has been established between the computer and the camera. The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer.
  - No guarantees are made for charging using a custom-built computer or a modified computer.

#### Hint

- When the Charge lamp flashes and charging is not finished, remove and re-insert the battery pack.

Go to Page Top

### Related Topic

- Charging the battery pack
- Battery life and number of images that can be recorded

Go to Page Top